COUGAR DUOFACE PRO RGB Mid Tower ATX Case

The COUGAR DUOFACE PRO RGB ships with two front panels in the box, one tempered glass and one mesh. Swap them without tools depending on whether you want the glass look or the airflow. Four 120mm ARGB fans are already fitted, three front and one rear.

Key specifications

• Form factor: mid tower
• Motherboard support: Mini-ITX, Micro-ATX, ATX, CEB, E-ATX
• Maximum GPU length: 390mm
• Maximum CPU cooler height: 190mm
• Dimensions: 240 x 496 x 465mm
• Expansion slots: 7 horizontal plus 3 vertical
• Finish: black or white

Cooling

• Included: 4x 120mm ARGB fans, 3 front and 1 rear
• Total fan capacity: up to 9
• Front or top radiator: 360, 280 or 240mm, under 55mm thickness
• Rear radiator: 140 or 120mm

Storage and connectivity

• Drive bays: 2x 3.5 inch HDD, 2x 2.5 inch SSD
• Front IO: 1x USB-C Gen2, 2x USB 3.0, 1x USB 2.0, 3.5mm audio, RGB button, power button

Choosing the panel

The glass panel looks better and runs hotter. The mesh panel drops front intake restriction significantly and is the one to fit if you are running a hot CPU, a 360mm front radiator, or a high draw graphics card. Nothing stops you switching later, both panels stay in the box.

Before you buy: Radiator thickness is capped at 55mm in the front and top, which excludes thick radiators with push pull fans in those positions. As with the AIRFACE PRO, E-ATX support at 240mm case width means wide boards will overhang the right hand cable cutouts.

In the box: Chassis, tempered glass front panel, mesh front panel, 4x 120mm ARGB fans pre-installed, screw kit, cable ties, manual