
A 240mm all in one with a five year warranty, which is longer than most of the market offers. The pump cap carries six addressable RGB LEDs, and the tubing uses low permeability rubber with a braided nylon sleeve and rotating 90 degree elbow fittings at the block, so routing is easier than on a fixed fitting cooler.
Read this before you buy
On this non RGB model the lighting is in the pump cap only. The two fans are plain Aspect 12 PWM with no LEDs. If you want lit fans, order the Lumen S24 RGB V2.
Specifications
- Model: Lumen S24 V2. Part number FD-W-L1-S2411
- Radiator: 240mm, 272 x 120 x 27mm, aluminium body and fins
- Cold plate: Copper with pre applied thermal paste. Block height 43mm
- Pump: 4000rpm plus or minus 10 percent, ceramic bearing, 12V DC, 22dBA at full speed, MTTF 50,000 hours
- Fans: 2 x 120mm Aspect 12 PWM, 500 to 2000rpm, 13 to 56 CFM, 2.34mm H2O, under 10 to 33.2dBA, rifle bearing, MTTF 90,000 hours
- Tubing: 400mm low permeability rubber with braided nylon sleeve, rotating 90 degree elbow fittings
- Lighting: 6 addressable RGB LEDs in the pump cap, 5V 3 pin ARGB. Fans are not lit
- RGB software: ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light, ASRock Polychrome Sync, Razer Chroma
- Intel sockets: LGA 1851, 1700, 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066
- AMD sockets: AM5, AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2
- Warranty: 5 years
In the box: Radiator with pump block, 2 x Aspect 12 PWM fans, Intel and AMD mounting hardware, cables, manual.
Specifications will be updated soon.
FAQs will be updated soon.
