Fractal Design Meshify 3 Black Solid ATX Mid Tower Cabinet

The 2025 Meshify, rebuilt around a new fan platform and an angled power supply shroud with an air guide that channels intake straight onto the graphics card. GamersNexus measured noise normalised CPU temperatures improving from 48 to 40 degrees over ambient against the previous generation, which is a large jump for a case refresh.

Read this before you buy

The Meshify 3 is smaller than the Meshify 2, not larger. Graphics card clearance drops from 470mm to 349mm and power supply length from 250mm to 180mm. If you are upgrading from a Meshify 2 with a long card or a long PSU, check your parts against these numbers first.

Cooling

Three 140mm Momentum 14 fans fitted at the front, using liquid crystal polymer blades on true fluid dynamic bearings with Fractal Connect single connector daisy chaining. Radiator support is 360mm front, 280mm top and 120mm rear.

Clearances

• Graphics card: up to 349mm length, 176mm thickness
• CPU cooler: up to 173mm
• Power supply: ATX up to 180mm

Specifications

• Model: Meshify 3 Black Solid. Part number FD-C-MES3A-01
• Type: ATX mid tower, 46.79 litres
• Motherboard support: E-ATX up to 277mm, ATX, Micro ATX, Mini ITX
• Dimensions: 433 x 229 x 507mm. Weight 8.7kg net
• Material: Steel chassis and mesh front, solid steel side panels
• Included fans: 3 x 140mm Momentum 14, non lit, 4 pin PWM, front intake
• Radiator support: Front 120, 240, 280 or 360mm. Top 120, 140, 240 or 280mm. Rear 120mm. No bottom position
• Fan mounts: Front 3 x 120/140mm. Top 2 x 120/140mm. Rear 1 x 120mm
• Drive bays: 2 dedicated 2.5 inch, 4 combined 3.5 or 2.5 inch
• Expansion slots: 7
• Front IO: 2 x USB Type-A 5Gbps, 1 x USB Type-C 20Gbps, audio and microphone combo jack, power button. No reset button
• Dust filters: PSU filter only, integrated into the case leg and slides out sideways. The front is bare mesh
• Warranty: 2 years

In the box: Cabinet with 3 pre installed Momentum 14 fans, drive trays, accessory box, manual.