FSP Hydro K PRO 600W 80 PLUS Bronze 230V EU Non Modular PSU

The FSP Hydro K PRO 600W is a straightforward non modular supply for mainstream and budget builds. 600W is enough for a mid range graphics card and a mainstream processor, and the 120mm hydraulic bearing fan keeps it quiet at the loads such a system actually pulls.

Key specifications

• Continuous output: 600W
• Efficiency: 80 PLUS 230V EU Bronze
• Standard: ATX 2.x
• Cabling: non modular, all cables permanently attached
• Fan: 120mm hydraulic bearing
• Form factor: ATX
• Warranty: 5 years

About the efficiency rating

This carries the 80 PLUS 230V EU Bronze certification, not the standard 115V Bronze rating used in North American listings. The 230V EU test is run at the mains voltage used in India, so the rating is the relevant one here, but do not compare it directly against a 115V Bronze figure.

Before you buy: Non modular means every cable is attached whether you use it or not, so plan for a cable bundle behind the motherboard tray. There is no 12VHPWR or 12V-2x6 connector. 600W is the right bracket for a card in the RTX 4060 or RX 7600 class, not for anything higher.

Part number note: FSP's own listing shows this as HP2-600, which does not follow the HD2 pattern used elsewhere in the Hydro K PRO range. We confirm the exact SKU with the distributor before dispatch.

In the box: PSU with attached cables, mains lead, mounting screws